Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Power - Beam (NOT sweep) ·BeamPower

6000

Rugged single-ended beam-power pentode designed for RF applications to approximately 100 MHz and for vehicular or aircraft equipment.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
6
Nominal heater
26.5 V / 280 mA

Description

Rugged single-ended beam-power pentode amplifier for radio-frequency applications to 100 MHz and vehicular or aircraft use.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
6
Nominal heater voltage
26.5 V
Nominal heater current
280 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Beam Power

X-ray radiationInterelectrode capacitances
Transconductance
0.008 S
Amplification factor
8
Max plate voltage
600 V
Max screen voltage
300 V
Max plate dissipation
25 W
Max screen dissipation
4 W

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • MaximumOperatingFrequency

    100 MHz

  • Service

    RF power amplifier

  • Maximum DC Plate Current

    125 mA

    Class C maximum

  • Maximum heater-cathode voltage

    100 V

    Either polarity

Capacitance

  • Grid 1 to plate capacitance

    0.18 pF

    Maximum

  • Input capacitance

    15 pF

  • Output capacitance

    7 pF