Alternatives & variations Download PDF datasheet

5K70SH

S-band power-amplifier klystron designed specifically for industrial heating, using forced-air and water cooling.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 7.5 V / 11.5 A

Description

S-band power-amplifier klystron designed for industrial heating; forced-air and water cooled. Published heater, frequency, beam, collector and output-power data are captured from the source.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 7.5 V
Nominal heater current: 11.5 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Promoted fields populated from published ratings/characteristics; additional published values retained in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 Eimac

Published operating points and test conditions from this source.

SECTION 1

Klystron

Characteristic

Heater Warm-up Time
5 min
Frequency
2450 MHz
Rated Output Power
30 kW
Minimum Power Gain
50 dB

Other

Maximum Beam Voltage
23 kV
Maximum Beam Current
3 A
Maximum Beam Input Power
70 kW
Maximum Collector Dissipation
70 kW
Typical Output Power
31.5 kW
Frequency=2450MHz
Typical Beam Voltage
22.5 kV
Frequency=2450MHz
Typical Beam Current
2.66 A
Frequency=2450MHz
Typical Efficiency
52.5 percent
Frequency=2450MHz