Data set 01
1946 Standard Telephone and Cables
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Characteristics
Interelectrode capacitances published
1
See source table for individual capacitances
Power - Beam (NOT sweep) ·BeamPower
5C100A
Directly heated beam-power amplifier specifically intended for radio-frequency power service, with a 100-watt maximum plate-dissipation rating.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- LARGE7BAYONET
- Base pins
- 7
- Nominal heater
- 10 V / 5 A
Description
Directly heated RF beam-power amplifier.
Socket description
Large American 7-contact bayonet base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- LARGE7BAYONET
- Base pins
- 7
- Nominal heater voltage
- 10 V
- Nominal heater current
- 5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0033 S
- Max plate voltage
- 2000 V
- Max screen voltage
- 400 V
- Max plate dissipation
- 100 W
- Max screen dissipation
- 15 W
- Max cathode current
- 200 mA
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1947 Standard Valves
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Maximum frequency at full rating
30 MHz
RF power output
50 W
ClassC