Data set 01
1950 General Electric Transmitting Types
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
HeaterOrFilamentVoltage
10 V
HeaterOrFilamentCurrent
5 A
Other
MaximumOperatingFrequency
150 MHz
Power - Triode (over 1000V 100W) ·Triode
592
Forced-air-cooled transmitting triode for RF amplification, oscillation, audio amplification, and Class B modulation. Rated for 200 W plate dissipation, with published RF operation producing about 600 W output to approximately 150 MHz.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 10 V / 5 A
Description
Forced-air-cooled transmitting triode for amplifier, oscillator, or Class B modulator service through 150 MHz.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 10 V
- Nominal heater current
- 5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Amplification factor
- 25
- Max plate voltage
- 3500 V
- Max plate dissipation
- 200 W
- Max grid dissipation
- 25 W
- Max cathode current
- 250 mA
Promoted from printed maximum ratings and general characteristics.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1962 Eimac
Published operating points and test conditions from this source.
SECTION 1
Triode
Capacitance
Grid-Plate - - - - - - - - - - 33uuf
33 pF
Grid-Filament - - - - - - - - - 36uuf
36 pF
Plate-Filament - - - - - 029 uuf
29 pF
Data set 03
1975 Eimac Tube Manual
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Grid-Plate Capacitance
3.3 pF
Grid-Filament Capacitance
3.6 pF
Plate-Filament Capacitance
0.29 pF
Transconductance
0.0036 A/V
Frequency Maximum
150 MHz
AF Plate Voltage Maximum
3500 V
AF Max-Signal Plate Current
250 mA
Plate-Modulated RF Plate Voltage Maximum
2600 V
RF Plate Voltage Maximum
3500 V
RF Plate Current Maximum
250 mA
Typical RF Plate Output
600 W
Data set 04
1976 Eimac Tube Manual
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Grid-Plate Capacitance
3.3 pF
Grid-Filament Capacitance
3.6 pF
Plate-Filament Capacitance
0.29 pF
Transconductance
0.0036 A/V
Frequency Maximum
150 MHz
AF Plate Voltage Maximum
3500 V
AF Max-Signal Plate Current
250 mA
Plate-Modulated RF Plate Voltage Maximum
2600 V
RF Plate Voltage Maximum
3500 V
RF Plate Current Maximum
250 mA
Typical RF Plate Output
600 W