Voltage Pentode or Tetrode (under 100V) ·Pentode
Radiation-cooled directly heated miniature voltage-amplifier pentode, co-designated with 6008 in manufacturer literature. It is intended for compact signal-amplifier service using a filamentary cathode rather than conventional indirectly heated construction.
5911 is a Pentode device. Radiation-cooled directly heated miniature voltage-amplifier pentode; source co-designates 6008/5911.
Small-button Noval 9-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Electrical values extracted from the supplied source table; typical operating values are preserved in TUBE_SECTION_PARAMETER.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Grid-to-plate capacitance
0.2 pF
Output capacitance
1.5 pF
Plate resistance
0.4 MOhm
Maximum plate voltage
45 V
Maximum plate dissipation
1.5 mW
Control-grid voltage
-0.2 V
Screen-grid voltage
45 V
Plate current
50 uA
Data set 02
Published operating points and test conditions from this source.
Grid-to-plate capacitance
0.2 pF
Input capacitance
1.5 pF
Plate voltage
45 V
Grid voltage
-0.2 V
Screen voltage
45 V
Output power
2.25 mW
Transconductance
50 uS
Plate resistance
0.4 MOhm