Voltage Regulator ·VoltageRegulator
Ruggedized cold-cathode glow-discharge voltage-reference tube providing approximately 85–86 V with controlled noise and transient behavior.
The 5783WA is an inert-gas-filled cold-cathode glow-discharge reference diode for regulated supplies, designed for low voltage drift and long life with high shock and vibration ratings.
Subminiature 6-lead base
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published promoted fields populated semantically; identical repeated sections compressed.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Reference Voltage
86 V
Approximately
Minimum Operating Current
1.5 mA
Regulation range
Maximum Operating Current
3.5 mA
Regulation range
Transient Voltage Variation
5 mV
Maximum over regulation range
Data set 02
Published operating points and test conditions from this source.
MaintainingVoltage
85 V
GlowDischarge
MaintainingCurrentMinimum
0.5 mA
MaintainingCurrentMaximum
10 mA
Data set 03
Published operating points and test conditions from this source.
Maximum DC operating current
3.5 mA
WholeTube
Minimum DC operating current
1.5 mA
WholeTube
Average operating voltage
85.5 V
TypicalOperation
Maximum voltage jump
5 mV
WholeTube
Maximum noise
20 mV
WholeTube
Maximum shunt capacitance
0.02 uF
WholeTube
Operating voltage range
81 to 92 V
TypicalOperation
Operating current range
1.5 to 3.5 mA
TypicalOperation
Minimum starting/anode supply voltage
140 V
Starting