Skip to main content

Power - Beam (NOT sweep) ·BeamPower

5763

Industrial VHF beam-power tube for low-power mobile transmitters, fixed-station drivers, oscillators, and frequency multipliers, providing useful Class-C RF output.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
9K
Socket code
B9A
Base pins
8
Nominal heater
6.3 V / 750 mA

Description

Industrial VHF beam-power tube for low-power mobile transmitters, fixed-station driver stages, oscillators and frequency multipliers. Extracted from the supplied RCA Receiving Tube Manual excerpt.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
9K
Socket code
B9A
Base pins
8
Nominal heater voltage
6.3 V
Nominal heater current
750 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

9K - Terminal pinout

Electrical assignments shared by every tube using this base designation.

TerminalSectionConnectionEvidence
PIN1PAP — Plate (Anode)

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN3G3AG3 — Suppressor Grid

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN4H—H — Heater

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN5H—H — Heater

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN6G2AG2 — Screen Grid

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN7KAK — Cathode

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN8G1AG1 — Control Grid

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

PIN9G1AG1 — Control Grid

EIA transcription; manufacturer verification pending

Unverified

EIA Base Connections, printed page 130, 9K

Section ratings

1 physical section, each with unique specifications.

Section 1

Beam Power

X-ray radiationInterelectrode capacitances
Plate resistance
30000 Ω
Transconductance
0.006 S
Max plate voltage
600 V
Max screen voltage
250 V
Max plate dissipation
12 W
Max screen dissipation
1.5 W
Max cathode current
65 mA
Rectifier max heater-cathode voltage
200 V

Published promoted fields populated semantically; identical repeated sections compressed.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1940 RCA

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • Maximum Frequency

    175 MHz

Application

  • Application

    RFPower_Oscillator_FrequencyMultiplier text

Data set 02

1956 RCA Transmitting Tubes

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Characteristic

  • HeaterOrFilamentVoltage

    6 V

  • HeaterOrFilamentCurrent

    150 mA

Data set 03

1958 Brimar Radio Valve No 7

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • Maximum Frequency

    175 MHz

    Full ratings

  • Power Output

    8 W

    ClassC; OscillatorOrPowerAmplifier; 50MHz

  • Frequency Doubler Output

    3.6 W

    FrequencyMultiplier; 175MHz

  • Frequency Tripler Output

    2.8 W

    FrequencyMultiplier; 175MHz

Characteristics

  • Anode Voltage

    250 V

    ClassA

  • Anode Current

    45 mA

    ClassA

  • Screen Current

    4.7 mA

    ClassA

Data set 04

1960 RCA Industrial and Communications Types

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Application

  • Application

    VHF RF amplifier / doubler / tripler

Characteristics

  • Tube class

    VHF beam-power tube

Data set 05

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • RFPowerOutput

    8 W

    ClassC

  • Plate Voltage

    300 V

    ClassC

Data set 06

1966 Tung Sol Electronic Tubes 3 of 4

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Characteristic

  • Grid-1-to-plate capacitance maximum

    0.3 pF

    WholeTube

  • Input capacitance

    9.5 pF

    WholeTube

  • Output capacitance

    4.5 pF

    WholeTube

  • Transconductance

    5100 µS

    TypicalOperation

Other

  • Maximum DC plate voltage

    350 V

    ClassCTelegraphyICAS

  • Maximum screen voltage

    250 V

    ClassC

  • Maximum DC plate current

    50 mA

    ClassC

  • Maximum plate dissipation

    13.5 W

    ClassCTelegraphyICAS

  • Maximum screen input

    2 W

    ClassC

  • Plate voltage

    350 V

    ClassCUpTo30MHz

  • Screen voltage

    250 V

    ClassCUpTo30MHz

  • Plate current

    48.5 mA

    ClassCUpTo30MHz

  • Screen current

    6.2 mA

    ClassCUpTo30MHz

  • Driving power

    0.1 W

    ClassCUpTo30MHz

  • Useful power output

    12 W

    ClassCUpTo30MHz

Data set 07

1971 RCA HB3 Binder 6 of 7

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Other

  • Maximum DC Plate Voltage

    350 V

    VHF beam-power service

  • Plate Dissipation

    13.5 W

    VHF beam-power service

  • Screen Input

    1.5 W

    VHF beam-power service

  • Typical Plate Voltage

    350 V

    VHF beam-power service

  • Useful Power Output

    12 W

    VHF beam-power service

Characteristics

  • Transconductance

    7000 µS

    VHF beam-power service

  • Mu Factor, Screen to Control Grid

    16

    VHF beam-power service

  • Grid-No.1 to Plate Capacitance

    0.3 pF

    VHF beam-power service

  • Input Capacitance

    9.5 pF

    VHF beam-power service

  • Output Capacitance

    4.5 pF

    VHF beam-power service

Data set 08

1975 RCA RC30

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Capacitance

  • Grid-to-plate capacitance

    0.3 pF

    Max

  • Input capacitance

    9.5 pF

  • Output capacitance

    4.5 pF

Other

  • Plate current

    50 mA

    RFPower

  • Screen current

    16 mA

    RFPower ICAS

  • Useful power output

    12 W

    ClassC RFPower 30MHz ICAS

  • Useful power output

    7 W

    ClassC RFPower 50MHz

  • Frequency multiplier plate voltage

    300 V

    FrequencyMultiplier

  • Frequency doubler power output

    2.1 W

    FrequencyMultiplier

  • Frequency tripler power output

    1.3 W

    FrequencyMultiplier