Skip to main content

Power - Triode (over 1000V 100W) ·Triode

5736

Thoriated-tungsten transmitting triode for modulator, amplifier, oscillator, and wide-band television RF service. Rated for 2.5 kW plate dissipation, with published Class C operation producing about 4.1 kW RF output to roughly 60 MHz.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6 V / 60 A

Description

Thoriated-tungsten power triode for modulator, amplifier, oscillator, and wide-band television RF service.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6 V
Nominal heater current
60 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Amplification factor
22
Max plate voltage
5000 V
Max plate dissipation
2500 W

Published ratings and characteristics promoted where applicable; remaining useful published values retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1958 Amperex Industrial

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    5000 V

    RFPowerAmplifier

  • Plate current

    1 A

    RFPowerAmplifier

  • Power output

    4100 W

    RFPowerAmplifier

  • Control-grid voltage

    -850 V

    RFPowerAmplifier

  • Grid current

    210 mA

    RFPowerAmplifier

  • Maximum frequency at full input

    60 MHz

    RFPowerAmplifier

  • Maximum plate dissipation

    2500 W

    RFPowerAmplifier

Characteristic

  • Amplification factor

    22

    RFPowerAmplifier

Capacitance

  • Grid-to-plate capacitance

    14.5 pF

    Section1

  • Grid-to-filament capacitance

    17.5 pF

    Section1

  • Plate-to-filament capacitance

    0.5 pF

    Section1

Data set 02

195X Central Electronics

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Filament voltage

    6 V

  • Amplification factor

    22

Other

  • Maximum plate voltage

    5000 V

  • Maximum plate/anode dissipation

    2500 W