Voltage Regulator ·VoltageRegulator
Rugged subminiature cold-cathode gas-filled voltage stabilizer maintaining roughly 90 V over approximately 5–25 mA.
Cold-cathode gas-filled glow-discharge voltage regulator, approximately 95 V.
Miniature 7-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Subminiature gas-filled shock- and vibration-resistant voltage stabilizer tube.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Regulator maintaining voltage
90 V
Approximate published operating voltage
Regulator current
5 mA to 25 mA
Published operating-current range
Ionization voltage
175 V
Published total-darkness test limit
Data set 02
Published operating points and test conditions from this source.
Operating current
5 mA
LowCurrentPoint
Operating current
25 mA
HighCurrentPoint
Maximum shunt capacitance
- to 0.1 uF
Ignition voltage
- to 125 V
Voltage regulation
- to 5 V
Data set 03
Published operating points and test conditions from this source.
Filling
Gas
Maintaining voltage range
85-105 V
OperatingCurrentRange
Maintaining voltage end-of-life range
82-108 V
Regulation current range
5-25 mA
Maximum striking voltage
135 V