Data set 01
1961 Ferranti Technical Handbook
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Characteristic
HeaterOrFilamentVoltage
50 V
HeaterOrFilamentCurrent
150 mA
Other
Power Output
4.3 W
ClassA
Power - Beam (NOT sweep) ·BeamPower
50L6G
Beam-power output tube designed for high audio output from low-voltage AC/DC receiver supplies, serving conventional single-ended receiver power stages.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater
- 50 V / 150 mA
Description
Beam-power output tube for high audio power from low-voltage AC/DC receiver supplies.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater voltage
- 50 V
- Nominal heater current
- 150 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.0095 S
- Max plate voltage
- 200 V
- Max screen voltage
- 110 V
- Max plate dissipation
- 10 W
- Max screen dissipation
- 1.25 W
Published Ferranti ratings and characteristics promoted from the supplied source.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.