Tube cross-reference
4EH7 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 4EH7 voltage pentode - remote cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Exact variations of 4EH7
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
LF183 Voltage Pentode - Remote Cutoff (single)
- Base
- 9AQ
- Socket
- B9A
- Base pins
- 9
- Sections
- 1
- Heater voltage
- 4.4 V
- Heater current
- 0.45 A
Replacement tubes for 4EH7
The following tubes are recorded as possible replacements for 4EH7. This direction does not establish that 4EH7 can replace them.
Voltage Pentode - Remote Cutoff (single)
The database records LF183 as a possible replacement for4EH7.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9AQ |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode
The database records YF183 as a possible replacement for4EH7.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode |
| Construction | Pentode | Pentode |
| Base | 9A0 | Not recorded |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4EJ7 as a possible replacement for4EH7.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9A0 |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4HM6 as a possible replacement for4EH7.
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9PM |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.2 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Remote Cutoff (single)
The database records 4HT6 as a possible replacement for4EH7.
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | Not recorded |
| Socket | B9A | B7G |
| Base pins | 9 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.2 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4JC6 as a possible replacement for4EH7.
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9PM |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4JC6A as a possible replacement for4EH7.
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9PM |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4JD6 as a possible replacement for4EH7.
- Not suitable for all circuits
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9PM |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.5 V |
| Heater current | 0.45 A | 0.45 A |
Where 4EH7 can be used as the replacement
In these recorded relationships, 4EH7 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 4EH7.
Voltage Pentode - Remote Cutoff (single)
The database records 4EH7 as a possible replacement forLF183.
No special restrictions are recorded for this substitution.
| Specification | 4EH7 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9AQ |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode
The database records 4EH7 as a possible replacement forYF183.
No special restrictions are recorded for this substitution.
| Specification | 4EH7 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode |
| Construction | Pentode | Pentode |
| Base | 9A0 | Not recorded |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Pentode - Sharp Cutoff (single)
The database records 4EH7 as a possible replacement for4EJ7.
No special restrictions are recorded for this substitution.
| Specification | 4EH7 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9A0 | 9A0 |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 4EH7 specifications →