Skip to main content

Voltage - Triode (single high frequency) ·Triode

3FH5

High-transconductance miniature triode for VHF RF-amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
B7G
Base pins
7
Nominal heater
3 V / 450 mA

Description

High-transconductance miniature triode for VHF RF-amplifier service.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
B7G
Base pins
7
Nominal heater voltage
3 V
Nominal heater current
450 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
5600 Ω
Transconductance
0.009 S
Amplification factor
50
Max plate voltage
150 V
Max plate dissipation
2.2 W
Max cathode current
22 mA

Promoted values are from the supplied Westinghouse family sheet; additional published ratings, characteristics and operating points are retained in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

  • GRID TO PLATE: G TO P (MAX.) (ROGEY) — 0.52 —*

    0.52 PF

    Published datasheet value

  • INPUT: G TO (H+K+(.S.) 3.2

    3.2 PF

    Published datasheet value

Other

  • MAXIMUM PLATE VOLTAGE

    150 VOLTS

    Published datasheet value

  • MAXIMUM DC CATHODE CURRENT

    22 MA

    Published datasheet value

  • HEATER WARM-UP TIME (APPROX.)*

    11 SECONDS

    Published datasheet value

  • PLATE VOLTAGE

    135 VOLTS

    Published datasheet value

  • GRID VOLTAGE

    -1 VOLT

    Published datasheet value

Data set 02

1965 Sylvania Electronic Tubes Vol3

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    135 V

  • Grid voltage

    -1 V

  • Plate current

    11 mA

Characteristics

  • Plate resistance

    5600 Ohm

  • Transconductance

    9000 uS

  • Amplification factor

    50 ratio

  • Control-grid cutoff voltage

    -5.5 V

Data set 03

1966 Tung Sol Electronic Tubes 1 of 4

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    135 V

    VHFRFAmplifier

  • Plate current

    11 mA

    VHFRFAmplifier

  • Application

    High-frequency RF amplifier

    Section1

Characteristic

  • Plate resistance

    5600 Ω

    Section1

  • Transconductance

    9000 µS

    Section1

  • Amplification factor

    50

    Section1

  • Grid voltage at 100 uA plate current

    -5.5 V

    Section1

  • Heater warm-up time

    11 s

    Section1