Rectifier - Full Wave ·Rectifier-Rectifier
High-current full-wave vacuum rectifier for power-supply service. Rated for approximately 1.05 kV peak inverse voltage, 350 mA DC output, and 1.2 A peak current from a 3.3 V heater.
A vacuum rectifier documented for television or power-supply service.
International Octal
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
2 physical sections, each with unique specifications.
Section 1
First physical rectifier section; genuine rectifier ratings retained and unrelated contaminated transconductance cleared.
Section 2
Second physical rectifier section; electrical properties populated from the documented identical section.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
MAXIMUM PEAK INVERSE PLATE VOLTAGE
1050 VOLTS
Published datasheet value
MAX IMUM STEADY—STATE PEAK PLATE CURRENT PZR PLATE
1200 MA
Published datasheet value
DC OUTPUT CURRENT 3h
350 MA
Published datasheet value
DC OUTPUT VOLTAGE AT FILTER INPUT
300 VOLTS
Published datasheet value
Data set 02
Published operating points and test conditions from this source.
Peak inverse plate voltage
1050 V
EachPlate
Steady state peak plate current
1200 mA
EachPlate
Transient peak plate current
6.5 A
EachPlate
Bulb temperature maximum
200 degC
Tube voltage drop
25 V
350mAPerPlate
Data set 03
Published operating points and test conditions from this source.
Transient peak plate current per plate
6.5 A
MaximumDuration0.2s
AC plate-supply voltage per plate RMS
275 V
CapacitorInputFilter
Filter input capacitor
40 uF
CapacitorInputFilter
Total plate-supply resistance per plate
32 ohm
CapacitorInputFilter
DC output voltage at filter input
300 V
CapacitorInputFilter
Data set 04
Published operating points and test conditions from this source.
AC Plate-to-Plate Supply Voltage
550 V
CapacitorInputFilter
Filter Input Capacitor
40 uF
CapacitorInputFilter
Total Effective Plate Supply Impedance Per Plate
32 ohm
CapacitorInputFilter
DC Output Voltage
300 V
CapacitorInputFilter; full-load output current 0.350 A
Hot-Switching Transient Plate Current Per Plate
6.5 A
CapacitorInputFilter
Bulb Temperature
200 C
Hottest point on bulb surface
Filament Voltage
3.3 V
AC or DC; ±10%
AC Plate-to-Plate Supply Voltage
550 V
CapacitorInputFilter
Filter Input Capacitor
40 uF
CapacitorInputFilter
Total Effective Plate Supply Impedance Per Plate
32 ohm
CapacitorInputFilter
DC Output Voltage
300 V
CapacitorInputFilter; full-load output current 0.350 A
Hot-Switching Transient Plate Current Per Plate
6.5 A
CapacitorInputFilter
Bulb Temperature
200 C
Hottest point on bulb surface
Filament Voltage
3.3 V
AC or DC; ±10%
Data set 05
Published operating points and test conditions from this source.
Hot-switching transient plate current per plate
6.6 A
FullWaveRectifier
AC plate-to-plate supply voltage
660 V
CapacitorInputFilter
Filter-input capacitance
40 uF
CapacitorInputFilter
DC output voltage at 350 mA
300 V
CapacitorInputFilter
Hot-switching transient plate current per plate
6.6 A
FullWaveRectifier