Rectifier - Full Wave ·Rectifier-Rectifier
Gas-filled full-wave rectifier with two rectifier paths for power-supply applications. Rated for approximately 725 V peak inverse voltage, 500 mA DC output, and 4 A peak current.
The 3B22 is a gas-filled rectifier documented in the approved datasheet, with published filament and rectifier operating ratings.
Medium-shell UX 4-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
2 physical sections, each with unique specifications.
Section 1
Two identical rectifying anodes share the directly heated filament/cathode; one representative section row emitted.
Section 2
Second physical rectifier section; electrical properties populated from the documented identical section.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heating time
20 s
Published datasheet value
Continuously recurring peak current
4 A
Oscillograph peak
Heating time
20 s
Published datasheet value
Continuously recurring peak current
4 A
Oscillograph peak
Data set 02
Published operating points and test conditions from this source.
Filament voltage
2.5 V
Filament current
6.25 A
Minimum filament heating time
20 s
Peak anode current per anode
4 A
Mean anode current per anode
500 mA
4.5 s averaging
Filament voltage
2.5 V
Filament current
6.25 A
Minimum filament heating time
20 s
Peak anode current per anode
4 A
Mean anode current per anode
500 mA
4.5 s averaging