Data set 01
195X Tesla
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Other
HeaterVoltageNominal
18 V
Nominal
HeaterCurrentNominal
7 A
Nominal
Rectifier - Full Wave ·Rectifier-Rectifier
367
Gas-filled double-anode rectifier for lead-acid battery chargers handling batteries up to about twelve cells. Rated for approximately 3 A DC output and 18 A peak current with a low forward voltage drop.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 1.9 V / 8 A
Description
Gas-filled double-anode rectifier for lead-acid battery chargers up to twelve cells.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 1.9 V
- Nominal heater current
- 8 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 140 V
- Rectifier nominal output current
- 3 A
- Rectifier peak forward current
- 18 A
- Rectifier forward voltage drop
- 8 V
- Rectifier warm-up time
- 30 s
Published ratings/characteristics promoted from the approved source.
Section 2
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 140 V
- Rectifier nominal output current
- 3 A
- Rectifier peak forward current
- 18 A
- Rectifier forward voltage drop
- 8 V
- Rectifier warm-up time
- 30 s
Second physical rectifier section; electrical properties populated from the documented identical section.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1963 Philips Electron Tubes Handbook V3
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Characteristic
Filament heating time
30 s
IndustrialRectifier
Arc voltage drop
8 V
IndustrialRectifier
Ignition voltage
18 V
IndustrialRectifier
Other
Peak inverse anode voltage maximum
140 V
IndustrialRectifier
Average anode current maximum
3 A
IndustrialRectifier
Peak anode current maximum
18 A
IndustrialRectifier
Recommended temperature range
-55 to +75 °C
IndustrialRectifier
Transformer RMS voltage
45 V
CircuitA
DC output voltage
26 V
CircuitA
DC output current
6 A
CircuitA
SECTION 2
Rectifier
Characteristic
Filament heating time
30 s
IndustrialRectifier
Arc voltage drop
8 V
IndustrialRectifier
Ignition voltage
18 V
IndustrialRectifier
Data set 03
1999 Philips 0-D
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Other
Application: battery charger (
6 A
Application: battery charger (6 A per valve, max,12 Pb-
Application: chargeur d'accumulateurs (
6 A
Application: chargeur d'accumulateurs (6 A par tube,
Anwendung : Batterielader (
6 A
Anwendung : Batterielader (6 A pro R&hre, max, 12 Pb
SECTION 2
Rectifier
Other
Application: battery charger (
6 A
Application: battery charger (6 A per valve, max,12 Pb-
Application: chargeur d'accumulateurs (
6 A
Application: chargeur d'accumulateurs (6 A par tube,
Anwendung : Batterielader (
6 A
Anwendung : Batterielader (6 A pro R&hre, max, 12 Pb