Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Pentode
Other
Plate Voltage
110 V
Typical
Screen Voltage
110 V
Typical
Power Output
1.8 W
MaximumSignal
Power - Pentode Single (NOT beam) (under 10W) ·Pentode
35EH5
Power pentode designed for audio-frequency output service with a 35 V, 150 mA heater. Manufacturer data provide ratings, characteristics, and typical operating conditions for receiver audio power stages.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- 7-pin miniature
- Socket code
- B7G
- Base pins
- 7
- Nominal heater
- 35 V / 150 mA
Description
Power pentode intended for audio output service. It uses a nominal 35 V, 0.15 A heater. The supplied datasheet was used for ratings, characteristics, and typical operating data.
Socket description
Miniature 7-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 7-pin miniature
- Socket code
- B7G
- Base pins
- 7
- Nominal heater voltage
- 35 V
- Nominal heater current
- 150 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
7-pin miniature - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 12000 Ω
- Transconductance
- 0.0075 S
- Max plate voltage
- 150 V
- Max screen voltage
- 130 V
- Max plate dissipation
- 5.5 W
- Max screen dissipation
- 1 W
- Max cathode current
- 100 mA
Published promoted fields populated by semantic section ownership.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1965 Westinghouse Data Book
Published operating points and test conditions from this source.
SECTION 1
Pentode
Characteristic
Heater Voltage
35 V
Heater Current
150 mA
Transconductance
12000 uS
Input Capacitance
9 pF
Output Capacitance
8.5 pF
Other
Plate Voltage
110 V
ClassA
Screen Voltage
110 V
ClassA
Grid Voltage
-5 V
ClassA
Plate Current
50 mA
ClassA
Screen Current
7 mA
ClassA
Load Resistance
2200 ohm
ClassA
Power Output
1.2 W
ClassA
Data set 03
1966 Tung Sol Electronic Tubes 3 of 4
Published operating points and test conditions from this source.
SECTION 1
Pentode
Characteristic
Plate Resistance
14000 ohm
Published datasheet value
Transconductance
12000 µS
Published datasheet value
InterelectrodeCapacitanceDataPublished
1 boolean
See supplied datasheet capacitance table
Other
MaxPlateVoltage
150 V
Published datasheet value
MaxScreenVoltage
130 V
Published datasheet value
MaxPlateDissipation
5 W
Published datasheet value
MaxScreenDissipation
1.75 W
Published datasheet value
Heater Voltage
35 V
Nominal heater rating
Heater Current
150 mA
Nominal heater rating
Data set 04
1971 RCA HB3 Binder 5 of 7
Published operating points and test conditions from this source.
SECTION 1
Pentode
Other
Maximum Plate Voltage
150 V
Maximum Screen Voltage
130 V
Plate Dissipation
5 W
Screen Input
1.75 W
Screen Supply Voltage
115 V
Characteristics
Plate Resistance
14000 Ω
Transconductance
12000 µS