Skip to main content

Power - Beam (NOT sweep) ·BeamPower-Triode

35DZ8

Combination high-mu triode and power pentode designed as a two-stage audio-frequency amplifier, integrating voltage gain and power output in one series-heater envelope.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
2
Base
9-pin miniature
Socket code
B9A
Base pins
9
Nominal heater
35 V / 150 mA

Description

High-mu triode and power pentode designed as a two-stage audio-frequency amplifier. It uses a nominal 35 V, 0.15 A heater. The supplied datasheet was used for ratings, characteristics, and typical operating data.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
9-pin miniature
Socket code
B9A
Base pins
9
Nominal heater voltage
35 V
Nominal heater current
150 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

9-pin miniature - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.0014 S
Max plate voltage
150 V
Max plate dissipation
0.75 W
Max cathode current
5 mA

Published promoted fields populated by semantic section ownership.

Section 2

Beam Power

X-ray radiationInterelectrode capacitances
Plate resistance
12000 Ω
Transconductance
0.0075 S
Max plate voltage
250 V
Max screen voltage
150 V
Max plate dissipation
6 W
Max screen dissipation
1.5 W
Max cathode current
60 mA

Published promoted fields populated by semantic section ownership.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 2

Beam Power

Characteristic

  • PentodeTransconductance

    7500 uS

    Section2

Data set 02

1966 Tung Sol Electronic Tubes 3 of 4

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

  • Transconductance

    1400 µS

    Published datasheet value

Other

  • MaxPlateVoltage

    150 V

    Published datasheet value

  • MaxPlateDissipation

    0.75 W

    Published datasheet value

  • MaxCathodeCurrent

    5 mA

    Published datasheet value

  • Heater Voltage

    35 V

    Nominal heater rating

  • Heater Current

    150 mA

    Nominal heater rating

SECTION 2

Beam Power

Characteristic

  • Transconductance

    7500 µS

    Published datasheet value

Other

  • MaxPlateVoltage

    150 V

    Published datasheet value

  • MaxScreenVoltage

    135 V

    Published datasheet value

  • MaxPlateDissipation

    6.5 W

    Published datasheet value

  • MaxScreenDissipation

    1.5 W

    Published datasheet value

  • MaxCathodeCurrent

    60 mA

    Published datasheet value

  • Heater Voltage

    35 V

    Nominal heater rating

  • Heater Current

    150 mA

    Nominal heater rating