Tube cross-reference
35C5 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 35C5 power - beam single (not sweep) (under 10w). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 35C5
The following tubes are recorded as possible replacements for 35C5. This direction does not establish that 35C5 can replace them.
Power - Pentode Single (NOT beam) (under 10W)
The database records HL94 as a possible replacement for35C5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | BeamPower | Pentode |
| Base | 7CV | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 35 V | 30 V |
| Heater current | 0.15 A | 0.15 A |
Power - Pentode Single (NOT beam) (under 10W)
The database records 30A5 as a possible replacement for35C5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | BeamPower | Pentode |
| Base | 7CV | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 35 V | 30 V |
| Heater current | 0.15 A | 0.15 A |
Where 35C5 can be used as the replacement
In these recorded relationships, 35C5 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 35C5.
Power - Pentode Single (NOT beam) (under 10W)
The database records 35C5 as a possible replacement for30A5.
No special restrictions are recorded for this substitution.
| Specification | 35C5 replacement | Original tube |
|---|---|---|
| Tube type | Power - Beam Single (NOT sweep) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | BeamPower | Pentode |
| Base | 7CV | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 35 V | 30 V |
| Heater current | 0.15 A | 0.15 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 35C5 specifications →