Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage - Triode (single) ·Triode

327

Early Cunningham triode documented for receiving-equipment service; available source metadata does not support a narrower functional assignment without speculation.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
4
Nominal heater
5 V / 1.75 A

Description

The 327 is a triode described in the Cunningham Radio Tube Manual for detector, amplifier, oscillator, rectifier, or power-output service as applicable to the type.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
4
Nominal heater voltage
5 V
Nominal heater current
1.75 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
10000 Ω
Transconductance
0.0008 S
Amplification factor
8
Max plate voltage
180 V

Core published characteristics promoted conservatively from the approved manual sheet.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

193X Cunningham

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Heater/filament voltage

    5 V

    Published nominal

  • Heater/filament current

    1.75 A

    Published nominal

  • Transconductance

    800 uS

    Published characteristic

  • Amplification factor

    8

    Published characteristic

  • Plate resistance

    10000 Ohm

    Published characteristic