30FL12

Triode/beam-power combination valve, co-designated PCE82, intended for television video-output and associated driver service with both power and small-signal sections in one envelope.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 2
Base: -
Socket code: B9A
Base pins: -
Nominal heater: 10 V / 300 mA

Description

Printed co-designation for the PCE82 television video-output triode beam-tetrode.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B9A
Base pins: -
Nominal heater voltage: 10 V
Nominal heater current: 300 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Transconductance: 0.0055 S
Max plate voltage: 250 V
Max plate dissipation: 1.5 W

Published ratings and characteristics promoted where clearly stated; identical repeated sections compressed when applicable.

Section 2

Beam Power

X-ray radiationInterelectrode capacitances

Max plate voltage: 250 V
Max screen voltage: 250 V
Max plate dissipation: 2.5 W
Max screen dissipation: 1.3 W

Published ratings and characteristics promoted where clearly stated; identical repeated sections compressed when applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1973 Mazda Valves Binder 2

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

Heater voltage
10 V
Published nominal value
Heater current
300 mA
Published nominal value

Other

Maximum plate dissipation
1.5 W
Published maximum rating

SECTION 2

Beam Power

Characteristics

Heater voltage
10 V
Published nominal value
Heater current
300 mA
Published nominal value

Other

Maximum plate dissipation
2.5 W
Published maximum rating