3073A

Single-ended water-cooled transmitting triode for high-power RF service, using a massive directly heated filament.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 10 V / 54 A

Description

3073A is a single ended water cooled triode described in the Standard Valves datasheet. The source provides construction, electrical constants, limiting conditions, and operating information.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 10 V
Nominal heater current: 54 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Plate resistance: 17400 Ω
Amplification factor: 40
Max plate voltage: 7500 V
Max plate dissipation: 2500 W
Max grid dissipation: 200 W
Max cathode current: 900 mA

Extracted semantically from complete approved datasheet.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1946 Standard Telephone and Cables

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

Grid-anode capacitance
9 pF
Anode-filament capacitance
1.5 pF
Grid-filament capacitance
7 pF

Other

Maximum frequency for full ratings
50 MHz
Maximum anode voltage at 100 MHz
5000 V
Frequency=100MHz