Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Capacitance
Grid4 To Plate Capacitance
0.035 pF
Maximum
Input Capacitance
4.5 pF
Output Capacitance
2.79 pF
Voltage Tetrode ·Tetrode
2EV5
VHF tetrode designed as the RF amplifier in television tuners, providing high-frequency gain with controlled cutoff characteristics for front-end receiver service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B7G
- Base pins
- 7
- Nominal heater
- 2.4 V / 600 mA
Description
Frame-grid tetrode for VHF television-tuner RF amplifier service.
Socket description
Miniature 7-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B7G
- Base pins
- 7
- Nominal heater voltage
- 2.4 V
- Nominal heater current
- 600 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 150000 Ω
- Transconductance
- 0.0088 S
- Max plate voltage
- 275 V
- Max screen voltage
- 180 V
- Max plate dissipation
- 3.25 W
- Max screen dissipation
- 0.2 W
- Max cathode current
- 20 mA
- Rectifier max heater-cathode voltage
- 200 V
- Rectifier warm-up time
- 11 s
Published promoted fields populated from Maximum Ratings / Characteristics / Typical Operation headings.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1965 Sylvania Electronic Tubes Vol3
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Other
Plate voltage
250 V
Screen-grid voltage
80 V
Grid 1 voltage
-1 V
Characteristics
Plate resistance
150000 Ohm
Transconductance
8800 uS
Control-grid cutoff voltage
-4.5 V
Capacitance
Grid-to-plate capacitance
0.035 pF
Shielded
Input capacitance
4.5 pF
Shielded
Output capacitance
2.9 pF
Shielded
Data set 03
1965 Westinghouse Data Book
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristics
Heater Voltage
2.4 V
Heater Current
600 mA
Grid-Plate Capacitance
0.035 pF
Maximum; Shielded
Input Capacitance
4.5 pF
Shielded
Output Capacitance
2.9 pF
Shielded
Operating Frequency
200 MHz
NoiseFigureContext
Other
Maximum Plate Voltage
275 V
Maximum Screen Supply Voltage
180 V
Maximum Plate Dissipation
3.25 W
Maximum Screen Dissipation
0.2 W
Maximum Cathode Current
20 mA
Plate Voltage
250 V
Screen Voltage
80 V
Grid Voltage
-1 V
Data set 04
1966 Tung Sol Electronic Tubes 1 of 4
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Capacitance
GRID #i TO PLATE (MAX.J
0.035 ΜΜF
Capacitances | GRID #i TO PLATE (MAX.J 0.035 µµf
Other
HEATER VOLTAGE
2.4 V
Maximum Ratings | HEATER VOLTAGE 2.4 VOLTS
MAXIMUM PLATE VOLTAGE
275 V
Maximum Ratings | MAXIMUM PLATE VOLTAGE 275 VOLTS
MAXIMUM PLATE DISSIPATION
3.25 W
Maximum Ratings | MAXIMUM PLATE DISSIPATION 3.25 WATTS
MAXIMUM GRID #
2 W
Maximum Ratings | MAXIMUM GRID #2 DISSIPATION O.2 WATTS
HEATER VOLTAGE Z
4 V
Typical Operating Conditions | HEATER VOLTAGE Z.4 VOLTS
PLATE RESISTANCE
0.15 Mohm
Typical Operating Conditions | PLATE RESISTANCE 0.150 MEGOHM
PLATE CURRENT
11.5 mA
Typical Operating Conditions | PLATE CURRENT 11.5 MA.
GRID #
0.9 mA
Typical Operating Conditions | GRID #2 CURRENT 0.90 MA.