Tube cross-reference
2ER5 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 2ER5 voltage - triode (single high frequency). Compare core specifications and verify every restriction before using a replacement.
Exact variations of 2ER5
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
XC95 NEW (being researched)
- Base
- Not recorded
- Socket
- Not recorded
- Base pins
- Not recorded
- Sections
- 1
- Heater voltage
- Not recorded
- Heater current
- Not recorded
Replacement tubes for 2ER5
The following tubes are recorded as possible replacements for 2ER5. This direction does not establish that 2ER5 can replace them.
Voltage - Triode (single high frequency)
The database records 2ES5 as a possible replacement for2ER5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.35 V |
| Heater current | 0.6 A | 0.6 A |
Voltage - Triode (single high frequency)
The database records 2FQ5 as a possible replacement for2ER5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.3 V |
| Heater current | 0.6 A | 0.6 A |
Voltage - Triode (single high frequency)
The database records 2FQ5A as a possible replacement for2ER5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | 7FP |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.3 V |
| Heater current | 0.6 A | 0.6 A |
Voltage - Triode (single high frequency)
The database records 2FY5 as a possible replacement for2ER5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.35 V |
| Heater current | 0.6 A | 0.6 A |
Where 2ER5 can be used as the replacement
In these recorded relationships, 2ER5 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 2ER5.
Voltage - Triode (single high frequency)
The database records 2ER5 as a possible replacement for2ES5.
- Parallel heater circuits only
- No-warmup series circuits only
| Specification | 2ER5 replacement | Original tube |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.35 V |
| Heater current | 0.6 A | 0.6 A |
Voltage - Triode (single high frequency)
The database records 2ER5 as a possible replacement for2FY5.
No special restrictions are recorded for this substitution.
| Specification | 2ER5 replacement | Original tube |
|---|---|---|
| Tube type | Voltage - Triode (single high frequency) | Voltage - Triode (single high frequency) |
| Construction | Triode | Triode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 2.3 V | 2.35 V |
| Heater current | 0.6 A | 0.6 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 2ER5 specifications →