Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Pentode
Capacitance
Grid To Plate Capacitance
0.2 pF
WithShield
Input Capacitance
15 pF
Output Capacitance
8 pF
Other
Power Output
30 W
ClassC
Power - Pentode (NOT beam) ·Pentode
2E22
Power pentode designed primarily for Class-C radio-frequency transmitting, amplifier, oscillator, or modulated RF service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- UY5
- Base pins
- 5
- Nominal heater
- 6.3 V / 1.5 A
Description
Directly heated power pentode for Class-C RF amplifier and oscillator service.
Socket description
Medium 5-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- UY5
- Base pins
- 5
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 1.5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 750 V
- Max screen voltage
- 250 V
- Max plate dissipation
- 30 W
- Max screen dissipation
- 10 W
- Max cathode current
- 110 mA
Directly heated power pentode for Class-C RF amplifier and oscillator service.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1966 Tung Sol Electronic Tubes 1 of 4
Published operating points and test conditions from this source.
SECTION 1
Pentode
Capacitance
PLATE MITTENT OpEP ATION TO AS nIGX AS
5.5 V
Capacitances | PLATE MITTENT OpEP ATION TO AS nIGX AS 1.0 OR AS LOW AS 5.5 VOLTS IS PER MISSI BI E.
Characteristic
SCREEN VOLTAGE
250 V
ClassC | SCREEN VOLTAGE 250 250 250 250 voLTs
SCREEN CURRENT
16 mA
ClassC | SCREEN CURRENT 16 16 16 16 MA.
CONTROL GRID RESISTOR C
0 ohm
ClassC | CONTROL GRID RESISTOR C 10 000 10 000 10 000 10 000 OHMS
PEAK R-F GRID VOLTAGE ~APPROX.~
100 V
ClassC | PEAK R-F GRID VOLTAGE ~APPROX.~ 100 100 100 100 VOLTS
PLATE VOLTAGE
750 V
ClassC | PLATE VOLTAGE 500 750 VOLTS
SCREEN VOLTAGE
250 V
ClassC | SCREEN VOLTAGE 250 250 VOLTS
SCREEN RESISTOR
0 ohm
ClassC | SCREEN RESISTOR 8 500 17 000 OHMS
SUPPRESSOR VOLTAGE
-90 V
ClassC | SUPPRESSOR VOLTAGE -65 -90 VOLTS
PEAK R-F GRID VOLTAGE
100 V
ClassC | PEAK R-F GRID VOLTAGE 100 100 VOLTS
PLA?E CURRENT
55 mA
ClassC | PLA?E CURRENT 50 55 MA.
SCREEN CURRENT ~APPROX.~
29 mA
ClassC | SCREEN CURRENT ~APPROX.~ 29 29 MA.
CONTROL GRID CURRENT ~APPRO%.~
6.5 mA
ClassC | CONTROL GRID CURRENT ~APPRO%.~ 6.5 6.5 MA.
CONTROL GRID RE SISTOR C
0 ohm
ClassC | CONTROL GRID RE SISTOR C 10 000 10 000 OHMS
GRID DRIVING POWER ~AP PR OX.)
0.6 W
ClassC | GRID DRIVING POWER ~AP PR OX.) 0.6 0.6 WATT
POWER OUTPUT ~APPR OX.~
16.5 W
ClassC | POWER OUTPUT ~APPR OX.~ 10.5 16.5 WATTS
VOLTAGE E%CEE
500 V
ClassC | VOLTAGE E%CEE05 500 VOLTS.