Skip to main content

Voltage - Triode (single high frequency) ·Triode

2DZ4

Medium-mu miniature triode for UHF oscillator and Class-A amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
B7G
Base pins
7
Nominal heater
2.35 V / 600 mA

Description

Medium-mu triode for UHF oscillator and Class-A amplifier service.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
B7G
Base pins
7
Nominal heater voltage
2.35 V
Nominal heater current
600 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
2000 Ω
Transconductance
0.0067 S
Amplification factor
14
Max plate voltage
135 V
Max plate dissipation
2.3 W
Max cathode current
40 mA

Medium-mu triode for UHF oscillator and Class-A amplifier service.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

  • Grid To Plate Capacitance

    1.8 pF

  • Input Capacitance

    2.2 pF

  • Output Capacitance

    1.3 pF

Data set 02

1966 Tung Sol Electronic Tubes 1 of 4

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

  • GRID TO PLATE

    1.8 pF

    Capacitances | GRID TO PLATE 1.8 pf

  • HEATER WARM-UP TIME

    11 s

    Capacitances | HEATER WARM-UP TIME 11 SECONDS

  • LIMITS OF SUPPLIED CURRENT

    40 mA

    Capacitances | LIMITS OF SUPPLIED CURRENT 600 ± 40 MA.

Other

  • PLATE VOLTAGE

    135 V

    Oscillator | PLATE VOLTAGE 135 VOLTS

  • NEGATIVE GRID VOLTAGE

    50 V

    Oscillator | NEGATIVE GRID VOLTAGE 50 VOLTS

  • PLATE DISSIPATION

    2.3 W

    Oscillator | PLATE DISSIPATION 2.3 WATTS

  • PLATE SUPPLY VOLTAGE

    80 V

    Oscillator | PLATE SUPPLY VOLTAGE 80 VOLTS

  • PLATE DROPPING RESISTOR

    2.7 ohm

    Oscillator | PLATE DROPPING RESISTOR 2.700 OHMS

  • GRID RESISTOR

    10 ohm

    Oscillator | GRID RESISTOR 10.000 OHMS

  • PLATE CURRENT

    15.5 mA

    Oscillator | PLATE CURRENT 15.5 MA.

Characteristic

  • PLATE SUPPLY VOLTAGE

    60 V

    ClassA | PLATE SUPPLY VOLTAGE 60 VOLTS

  • PLATE DROPPING RESISTOR

    2.7 ohm

    ClassA | PLATE DROPPING RESISTOR 2.700 OHMS

  • PLATE CURRENT

    15 mA

    ClassA | PLATE CURRENT 15 MA.

  • TRANSCONDUCTANCE

    6.7 uS

    ClassA | TRANSCONDUCTANCE 6.700 pMHOS

  • PLATE RESISTANCE APPROX

    2 ohm

    ClassA | PLATE RESISTANCE APPROX. 2.000 OHMS

  • GRID VOLTAGE FOR Ib

    -11 V

    ClassA | GRID VOLTAGE FOR Ib = 20 NA. APPRO X. -11 VOLTS