Data set 01
1961 Tung Sol
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Power Output
6 W
ClassA
Total Harmonic Distortion
10 %
ClassA
ExternalPlateLoadResistance
2600 ohm
ClassA
Power - Beam (NOT sweep) ·BeamPower
26E6WG
Ruggedized premium beam-power pentode for approximately five-watt single-ended audio output from 26-volt supplies common in airborne equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- 75
- Socket code
- IO
- Base pins
- 8
- Nominal heater
- 26.5 V / 300 mA
Description
The 26E6WG is a ruggedized premium single-ended beam pentode intended for AF power-output applications of about five watts, using the 26-volt supplies common in airborne equipment.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 75
- Socket code
- IO
- Base pins
- 8
- Nominal heater voltage
- 26.5 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
75 - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Plate resistance
- 18000 Ω
- Transconductance
- 0.0071 S
- Max plate voltage
- 220 V
- Max screen voltage
- 150 V
- Max plate dissipation
- 12.5 W
- Max screen dissipation
- 1.75 W
- Rectifier max heater-cathode voltage
- 1300 V
Class A AF power amplifier.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1966 Tung Sol Electronic Tubes 3 of 4
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Maximum DC plate voltage
220 V
WholeTube
Maximum DC screen voltage
150 V
WholeTube
Maximum plate dissipation
12.5 W
WholeTube
Maximum screen dissipation
1.75 W
WholeTube
Plate voltage
200 V
ClassA1
Screen voltage
135 V
ClassA1
Plate resistance
18000 ohm
ClassA1
Transconductance
7100 µS
ClassA1
Power output
6 W
ClassA1