Data set 01
1948 Brimar Radio Valve Manual
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Characteristic
HeaterOrFilamentVoltage
25 V
HeaterOrFilamentCurrent
300 mA
Other
RMSInputPerAnode
250 V
Rectifier - Half Wave ·Rectifier
25RE
Indirectly heated AC/DC rectifier for transformerless electronic supplies. Its 25 V heater construction supports approximately 250 V RMS input per anode and up to about 85 mA rectified output.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- IO
- Base pins
- -
- Nominal heater
- 25 V / 300 mA
Description
A.C./D.C. rectifier with 250 V RMS input per anode and 85 mA maximum rectified current.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- IO
- Base pins
- -
- Nominal heater voltage
- 25 V
- Nominal heater current
- 300 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier nominal output current
- 85 mA
Published ratings and characteristics promoted from the supplied Brimar source where explicitly available.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.