Skip to main content

Power - Triode (over 1000V 100W) ·Triode

250TL

Eimac low-mu transmitting power triode for RF amplifier and oscillator service. Manufacturer operating data emphasize Class-C radio-frequency power generation with substantial plate voltage, current, and output capability.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
MEDIUM4BAYONET
Base pins
4
Nominal heater
5 V / 10.5 A

Description

250TL is a Triode device. Radiation-cooled high-power transmitting triode for RF amplifier/oscillator service; 250TL is listed with 250 W maximum plate dissipation. Published operating, rating, and characteristic data from the supplied page were preserved in the technical output.

Socket description

Medium 4-contact bayonet base

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
MEDIUM4BAYONET
Base pins
4
Nominal heater voltage
5 V
Nominal heater current
10.5 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Transconductance
0.00265 S
Amplification factor
14
Max plate voltage
4000 V
Max plate dissipation
250 W
Max grid dissipation
35 W

Published maximum ratings and characteristics audited; additional applicable numerical data retained in parameter table.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1950 Eimac Tubes

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Voltage

    5 V

    Voltage - 5.0 volts

  • Current [1]

    10 A

    Current - 10 .5 amperes

  • Current [2]

    5 A

    Current - 10 .5 amperes

  • Grid-Plate

    3.1

    Grid-Plate 3.1 JLJLf

  • Grid -Filament

    3.7

    Grid -Filament 3.7 p.p.f

  • Plate-Filament [1]

    0

    Plate-Filament - 0 .7 p.p.f

  • Plate-Filament [2]

    7

    Plate-Filament - 0 .7 p.p.f

  • Transconductance ( [1]

    11

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Transconductance ( [2]

    350

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Transconductance ( [3]

    3000

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Transconductance ( [4]

    130

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Transconductance ( [5]

    26

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Transconductance ( [6]

    50

    Transconductance (11)=350 ma ., EI>=3000, e c = - 130 ) 26 50 p.mhos

  • Frequency for Maximum Rat ings

    40 MHz

    Frequency for Maximum Rat ings 40 mc

  • D-C Plate Voltage [1]

    1500 V

    D-C Plate Voltage 1500 2000 3000 3000 volts

  • D-C Plate Voltage [2]

    2000 V

    D-C Plate Voltage 1500 2000 3000 3000 volts

  • D-C Plate Voltage [3]

    3000 V

    D-C Plate Voltage 1500 2000 3000 3000 volts

  • D-C Plate Voltage [4]

    3000 V

    D-C Plate Voltage 1500 2000 3000 3000 volts

  • Max.-Signal D-C Plate Cu rrent, per t ube" - • • •

    350

    Max.-Signal D-C Plate Cu rrent, per t ube" - • • • 350 ma o

  • Plate Dissipa tion, per tube " • • •

    250

    Plate Dissipa tion, per tube " • • • 250 wat ts

  • D-C Grid Voltage (approx. ) [1]

    40 V

    D-C Grid Voltage (approx. ) - 40 - 80 -175 volts

  • D-C Grid Voltage (approx. ) [2]

    80 V

    D-C Grid Voltage (approx. ) - 40 - 80 -175 volts

  • D-C Grid Voltage (approx. ) [3]

    -175 V

    D-C Grid Voltage (approx. ) - 40 - 80 -175 volts

  • Peak A-F Grid Input Voltage [1]

    770 V

    Peak A-F Grid Input Voltage 770 800 840 volts

  • Peak A-F Grid Input Voltage [2]

    800 V

    Peak A-F Grid Input Voltage 770 800 840 volts

  • Peak A-F Grid Input Voltage [3]

    840 V

    Peak A-F Grid Input Voltage 770 800 840 volts

  • Z e ro-Sig nal D-C Plate Cu rrent [1]

    200

    Z e ro-Sig nal D-C Plate Cu rrent - 200 150 100 ma o

  • Z e ro-Sig nal D-C Plate Cu rrent [2]

    150

    Z e ro-Sig nal D-C Plate Cu rrent - 200 150 100 ma o

  • Z e ro-Sig nal D-C Plate Cu rrent [3]

    100

    Z e ro-Sig nal D-C Plate Cu rrent - 200 150 100 ma o

  • Max.-Signal D-C Plate Cu rren t [1]

    700

    Max.-Signal D-C Plate Cu rren t - 700 650 500 ma o

  • Max.-Signal D-C Plate Cu rren t [2]

    650

    Max.-Signal D-C Plate Cu rren t - 700 650 500 ma o

  • Max.-Signal D-C Plate Cu rren t [3]

    500

    Max.-Signal D-C Plate Cu rren t - 700 650 500 ma o

  • Ma x.-Signal Driving Power (approx.) [1]

    32 W

    Ma x.-Signal Driving Power (approx.) - 32 28 17 watts

  • Ma x.-Signal Driving Power (approx.) [2]

    28 W

    Ma x.-Signal Driving Power (approx.) - 32 28 17 watts

  • Ma x.-Signal Driving Power (approx.) [3]

    17 W

    Ma x.-Signal Driving Power (approx.) - 32 28 17 watts

  • Effective Load, Plate -to- Plate [1]

    3700

    Effective Load, Plate -to- Plate - 3700 6150 13000 ohms

  • Effective Load, Plate -to- Plate [2]

    6150

    Effective Load, Plate -to- Plate - 3700 6150 13000 ohms

  • Effective Load, Plate -to- Plate [3]

    13000

    Effective Load, Plate -to- Plate - 3700 6150 13000 ohms

  • Max.-S ignal Pla te Power Output [1]

    580 W

    Max.-S ignal Pla te Power Output 580 800 1000 watts

  • Max.-S ignal Pla te Power Output [2]

    800 W

    Max.-S ignal Pla te Power Output 580 800 1000 watts

  • Max.-S ignal Pla te Power Output [3]

    1000 W

    Max.-S ignal Pla te Power Output 580 800 1000 watts

  • D-C Plate Vo ltage [1]

    2000

    D-C Plate Vo ltage 2000 3000 4000 4000 volts

  • D-C Plate Vo ltage [2]

    3000

    D-C Plate Vo ltage 2000 3000 4000 4000 volts

  • D-C Plate Vo ltage [3]

    4000

    D-C Plate Vo ltage 2000 3000 4000 4000 volts

  • D-C Plate Vo ltage [4]

    4000

    D-C Plate Vo ltage 2000 3000 4000 4000 volts

  • D-C Plate Curren t [1]

    350

    D-C Plate Curren t 350 335 310 350 mao

  • D-C Plate Curren t [2]

    335

    D-C Plate Curren t 350 335 310 350 mao

  • D-C Plate Curren t [3]

    310

    D-C Plate Curren t 350 335 310 350 mao

  • D-C Plate Curren t [4]

    350

    D-C Plate Curren t 350 335 310 350 mao

  • D-C Grid Cu rrent [1]

    45

    D-C Grid Cu rrent 45 45 40 50 mao

  • D-C Grid Cu rrent [2]

    45

    D-C Grid Cu rrent 45 45 40 50 mao

  • D-C Grid Cu rrent [3]

    40

    D-C Grid Cu rrent 45 45 40 50 mao

  • D-C Grid Cu rrent [4]

    50

    D-C Grid Cu rrent 45 45 40 50 mao

  • D-C Grid Vol tage [1]

    200

    D-C Grid Vol tage - 200 - 350 - 500 vol ts

  • D-C Grid Vol tage [2]

    350

    D-C Grid Vol tage - 200 - 350 - 500 vol ts

  • D-C Grid Vol tage [3]

    500

    D-C Grid Vol tage - 200 - 350 - 500 vol ts

  • Plate Power Ou tp ut [1]

    4 W

    Plate Power Ou tp ut - 4 55 750 1000 watts

  • Plate Power Ou tp ut [2]

    55 W

    Plate Power Ou tp ut - 4 55 750 1000 watts

  • Plate Power Ou tp ut [3]

    750 W

    Plate Power Ou tp ut - 4 55 750 1000 watts

  • Plate Power Ou tp ut [4]

    1000 W

    Plate Power Ou tp ut - 4 55 750 1000 watts

  • Plate Dissipat ion [1]

    245

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [2]

    2

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [3]

    50

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [4]

    2

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [5]

    50

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [6]

    2

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Plate Dissipat ion [7]

    50

    Plate Dissipat ion - 245 2 50 2 50 2 50 watts

  • Pea k R. F. Gr id Input Voltage, (approx. ) [1]

    575 V

    Pea k R. F. Gr id Input Voltage, (approx. ) - 575 720 900 volts

  • Pea k R. F. Gr id Input Voltage, (approx. ) [2]

    720 V

    Pea k R. F. Gr id Input Voltage, (approx. ) - 575 720 900 volts

  • Pea k R. F. Gr id Input Voltage, (approx. ) [3]

    900 V

    Pea k R. F. Gr id Input Voltage, (approx. ) - 575 720 900 volts

  • Driving Power, (app rox. l [1]

    22 W

    Driving Power, (app rox. l 22 29 33 watts

  • Driving Power, (app rox. l [2]

    29 W

    Driving Power, (app rox. l 22 29 33 watts

  • Driving Power, (app rox. l [3]

    33 W

    Driving Power, (app rox. l 22 29 33 watts

  • the relationship of plate efficiency, I

    7

    the relationship of plate efficiency, I- 7'

  • power output and g rid driv ing power ~ [1]

    35 W

    power output and g rid driv ing power ~ 35 ........ 6'

  • power output and g rid driv ing power ~ [2]

    6 W

    power output and g rid driv ing power ~ 35 ........ 6'

  • a t plate voltages of [1]

    2000 V

    a t plate voltages of 2000, 3000 and II: %~:,t~ ~"ll:~:P~~GC:.N-

  • a t plate voltages of [2]

    3000 V

    a t plate voltages of 2000, 3000 and II: %~:,t~ ~"ll:~:P~~GC:.N-

  • plate d issipation in watts is indicated

    0

    plate d issipation in watts is indicated 0

Data set 02

1958 Amperex Industrial

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Plate voltage

    3000 V

    RFAmplifierOrOscillator; ClassC; Telegraphy

  • Plate current

    350 mA

    RFAmplifierOrOscillator; ClassC; Telegraphy

  • RF output power

    750 W

    RFAmplifierOrOscillator; ClassC; Telegraphy

  • Grid voltage

    -500 V

    RFAmplifierOrOscillator; ClassC; Telegraphy

  • Grid current

    50 mA

    RFAmplifierOrOscillator; ClassC; Telegraphy

  • Maximum frequency at full input rating

    40 MHz

Capacitance

  • Grid-to-plate capacitance

    3.1 pF

  • Grid-to-filament capacitance

    3.7 pF

  • Plate-to-filament capacitance

    0.7 pF

Data set 03

1962 Eimac

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

  • Frequency for Maximum Ratings

    40 MHz

Other

  • Maximum DC Plate Current

    350 mA

Capacitance

  • Grid-Plate Capacitance

    3 pF

  • Grid-Filament Capacitance

    3.7 pF

  • Plate-Filament Capacitance

    0.7 pF