Data set 01
1948 Brimar Radio Valve Manual
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristic
HeaterOrFilamentVoltage
2.5 V
HeaterOrFilamentCurrent
1.75 A
Voltage Tetrode ·Tetrode
24E
Screen-grid tetrode intended for receiver voltage amplification, detector, oscillator, or general Class-A service as documented by the manufacturer.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- UX5
- Base pins
- 5
- Nominal heater
- 2.5 V / 1.75 A
Description
RF screen-grid tetrode sharing the published 24A/24E characteristics.
Socket description
Small 5-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- UX5
- Base pins
- 5
- Nominal heater voltage
- 2.5 V
- Nominal heater current
- 1.75 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 600000 Ω
- Transconductance
- 0.001 S
Published ratings and characteristics promoted from the supplied Brimar source where explicitly available.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.