Data set 01
1936 Cossor Valve Manual
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristic
Grid bias variable
0 to 9 V
Range endpoint: 0.0 to 9.0
Voltage Tetrode ·Tetrode
220VSG
Variable-mu or remote-cutoff screen-grid tetrode for controlled RF or IF voltage amplification, permitting smooth receiver gain control over an extended grid-bias range.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B4
- Base pins
- 4
- Nominal heater
- 2 V / 200 mA
Description
Two-volt variable-mu screened-grid tetrode with extended grid-bias range.
Socket description
European 4-pin base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B4
- Base pins
- 4
- Nominal heater voltage
- 2 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 110000 Ω
- Transconductance
- 0.0016 S
- Max plate voltage
- 150 V
Published ratings/characteristics promoted from the approved datasheet.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
193X Cossor
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristics
Mutual Conductance
16000 µS
Published technical-data value