Voltage - Triode (single high frequency) ·Triode
210HF
Cossor directly heated triode for high-frequency receiver amplification, using a low-power two-volt filament.
- Sections
- 1
- Base
- -
- Socket code
- B4
- Base pins
- -
- Nominal heater
- 2 V / 100 mA
Description
Cossor 210HF triode for receiver/amplifier service as specified in the supplied catalogue datasheet.
Socket description
European 4-pin base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B4
- Base pins
- -
- Nominal heater voltage
- 2 V
- Nominal heater current
- 100 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
- Plate resistance
- 15800 Ω
- Transconductance
- 0.0015 S
- Amplification factor
- 24
- Max plate voltage
- 150 V
Published ratings and characteristics promoted from approved datasheet.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.