Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Power - Beam (NOT sweep) ·BeamPower

1T5GT

Beam-power amplifier designed for low-voltage battery-operated audio-output service, with published Class-A operation producing approximately 0.17 watt.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
6X
Socket code
IO
Base pins
7
Nominal heater
1.4 V / 50 mA

Description

Beam-power amplifier for low-voltage battery-operated audio output service. Electrical ratings and representative operating data were extracted from the approved manual page.

Socket description

International Octal

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
6X
Socket code
IO
Base pins
7
Nominal heater voltage
1.4 V
Nominal heater current
50 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

6X - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Beam Power

X-ray radiationInterelectrode capacitances
Plate resistance
250000 Ω
Transconductance
0.00115 S
Max plate voltage
110 V
Max screen voltage
110 V
Max cathode current
7.3 mA

Beam-power amplifier for low-voltage battery-operated audio output service.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X General Electric Essential Characteristics

Published operating points and test conditions from this source.

SECTION 1

Beam Power

Characteristics

  • Input capacitance

    4.8 pF

  • Output capacitance

    8 pF

  • Grid-to-plate capacitance

    0.5 pF

Other

  • Plate voltage

    90 V

    ClassA; OperatingPoint1

  • Screen voltage

    90 V

    ClassA; OperatingPoint1

  • Control-grid bias

    6 V

    ClassA; OperatingPoint1

  • Plate current

    6.5 mA

    ClassA; OperatingPoint1

  • Screen current

    0.8 mA

    ClassA; OperatingPoint1

  • Load resistance

    14000 ohm

    ClassA; OperatingPoint1

  • Power output

    0.17 W

    ClassA; OperatingPoint1