Skip to main content
Tube Tinker — Electron Tube Database
Alternatives & variationsDownload PDF datasheet

Voltage - Triode (single) ·Triode

1LE3

Low-filament-power directly heated medium-mu triode for battery-operated signal amplification and general receiving service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
4AA
Socket code
B8G
Base pins
8
Nominal heater
1.4 V / 50 mA

Description

1LE3 is listed as a medium-mu triode in the supplied receiving-tube handbook. It uses a 1.4 V, 0.05 A directly heated filament. The handbook publishes maximum ratings and representative operating characteristics for its intended service.

Socket description

Loctal 8-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
4AA
Socket code
B8G
Base pins
8
Nominal heater voltage
1.4 V
Nominal heater current
50 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

4AA - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
11200 Ω
Transconductance
0.0013 S
Amplification factor
14.5
Max plate voltage
110 V

Typical characteristics are condition dependent; representative published values promoted.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X General Electric Essential Characteristics

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Maximum plate voltage

    110 V

    Published handbook rating

  • Plate voltage

    90 V

    ClassA

  • Control-grid voltage

    0 V

    ClassA

  • Plate current

    4.5 mA

    ClassA

Characteristic

  • Plate resistance

    11200 ohm

    Published handbook characteristic

  • Transconductance

    1300 µS

    Published handbook characteristic

  • Amplification factor

    14.5

    Published handbook characteristic

  • Filament voltage

    1.4 V

    DirectlyHeated DC filament

  • Filament current

    50 mA

    DirectlyHeated DC filament

Data set 02

1961 Tung Sol

Published operating points and test conditions from this source.

SECTION 1

Triode

Capacitance

  • Grid To Plate Capacitance

    1.7 pF

    DirectInterelectrode

  • Input Capacitance

    1.7 pF

    DirectInterelectrode

  • Output Capacitance

    3 pF

    DirectInterelectrode