Data set 01
2026 Russian Receiving
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Plate Voltage
60 V
Plate Current
1.2 mA
SECTION 2
Hexode
Other
Plate Voltage
60 V
Plate Current
1.05 mA
Voltage Radio Detector Converter ·Hexode-Triode
1I2P
Russian directly heated triode-hexode frequency converter for low-power battery superheterodyne receivers. A 1.2 V, 60 mA oxide-coated filament powers separate triode oscillator and hexode mixer sections.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 1.2 V / 60 mA
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 1.2 V
- Nominal heater current
- 60 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.001 S
- Amplification factor
- 25
- Max plate dissipation
- 0.25 W
Russian 1I2P triode oscillator section of directly heated triode-hexode. Filament 1.2 V 60 mA. Typical plate 60 V at 1.2 mA, amplification factor 25 and gm 0.001 S; published anode power 0.25 W. Plate voltage is an operating point, not a specified maximum. Separate hexode mixer is section 2.
Section 2
Hexode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.00075 S
- Max plate dissipation
- 0.3 W
Russian 1I2P directly heated hexode frequency-converter mixer section physically distinct from triode oscillator. Typical plate voltage 60 V, anode current 1.05 mA, screens grids 2/4 at 45 V, transconductance 0.75 mA/V (0.00075 S) and printed anode power 0.3 W. These voltages are nominal operating points rather than confirmed maximum ratings; section maximum voltage fields remain unpopulated. Shared 1.2 V 60 mA filament.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.