Data set 01
1948 Brimar Radio Valve Manual
Published operating points and test conditions from this source.
SECTION 1
Diode
Application
Service
Detector diode
SECTION 2
Triode
Application
Service
Voltage amplifier
Voltage - Triode (with diode, heptode or hexode) ·Diode-Triode
1H5G
Directly heated diode-triode for detector and voltage-amplifier service in battery receivers. The diode recovers the received signal while the high-mu triode supplies subsequent voltage gain with very low filament consumption.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- 5Z
- Socket code
- IO
- Base pins
- 5
- Nominal heater
- 1.4 V / 50 mA
Description
1H5G is listed as a diode high-mu triode in the supplied receiving-tube handbook. It uses a 1.4 V, 0.05 A directly heated filament. The handbook publishes maximum ratings and representative operating characteristics for its intended service.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- 5Z
- Socket code
- IO
- Base pins
- 5
- Nominal heater voltage
- 1.4 V
- Nominal heater current
- 50 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
5Z - Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Published handbook maximum ratings and representative operating characteristics reviewed.
Section 2
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 240000 Ω
- Transconductance
- 0.000275 S
- Amplification factor
- 65
- Max plate voltage
- 110 V
Published handbook maximum ratings and representative operating characteristics reviewed.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1950 Sylvania
Published operating points and test conditions from this source.
SECTION 2
Triode
Other
Plate Voltage
90 V
Triode
Characteristic
Plate Current
0.15 mA
Triode
Capacitance
Grid-to-Plate Capacitance
1.1 pF
Triode
Data set 03
1958 Brimar Radio Valve No 7
Published operating points and test conditions from this source.
SECTION 2
Triode
Other
Plate Voltage
90 V
TriodeSection
Plate Current
0.15 mA
TriodeSection
Characteristic
Transconductance
275 µS
TriodeSection
Plate Resistance
240000 ohm
TriodeSection
Amplification Factor
65
TriodeSection
Data set 04
195X General Electric Essential Characteristics
Published operating points and test conditions from this source.
SECTION 2
Triode
Other
Maximum plate voltage
110 V
Published handbook rating
Plate voltage
90 V
ClassA
Control-grid voltage
0 V
ClassA
Plate current
0.15 mA
ClassA
Characteristic
Plate resistance
240000 ohm
Published handbook characteristic
Transconductance
275 µS
Published handbook characteristic
Amplification factor
65
Published handbook characteristic
Filament voltage
1.4 V
DirectlyHeated DC filament
Filament current
50 mA
DirectlyHeated DC filament