Tube cross-reference
16EP4A alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 16EP4A specialized - cathode ray. Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for 16EP4A
The following tubes are recorded as possible replacements for 16EP4A. This direction does not establish that 16EP4A can replace them.
Specialized - Cathode Ray
The database records 16EP4 as a possible replacement for16EP4A.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Specialized - Cathode Ray | Specialized - Cathode Ray |
| Construction | CathodeRay | CathodeRay |
| Base | 12O | 12O |
| Socket | DUODECAL5 | DUODECAL5 |
| Base pins | 5 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.6 A | 0.6 A |
Specialized - Cathode Ray
The database records 16EP4B as a possible replacement for16EP4A.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Specialized - Cathode Ray | Specialized - Cathode Ray |
| Construction | CathodeRay | CathodeRay |
| Base | 12O | 12O |
| Socket | DUODECAL5 | DUODECAL5 |
| Base pins | 5 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.6 A | 0.6 A |
Where 16EP4A can be used as the replacement
In these recorded relationships, 16EP4A is the replacement tube. The listed original tubes are not automatically suitable as replacements for 16EP4A.
Specialized - Cathode Ray
The database records 16EP4A as a possible replacement for16EP4.
No special restrictions are recorded for this substitution.
| Specification | 16EP4A replacement | Original tube |
|---|---|---|
| Tube type | Specialized - Cathode Ray | Specialized - Cathode Ray |
| Construction | CathodeRay | CathodeRay |
| Base | 12O | 12O |
| Socket | DUODECAL5 | DUODECAL5 |
| Base pins | 5 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.6 A | 0.6 A |
Specialized - Cathode Ray
The database records 16EP4A as a possible replacement for16EP4B.
No special restrictions are recorded for this substitution.
| Specification | 16EP4A replacement | Original tube |
|---|---|---|
| Tube type | Specialized - Cathode Ray | Specialized - Cathode Ray |
| Construction | CathodeRay | CathodeRay |
| Base | 12O | 12O |
| Socket | DUODECAL5 | DUODECAL5 |
| Base pins | 5 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.6 A | 0.6 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 16EP4A specifications →