Tube cross-reference
10EB8 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 10EB8 voltage triode pentode. Compare core specifications and verify every restriction before using a replacement.
Exact variations of 10EB8
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
10GN8 Power - Pentode (NOT beam)
- Base
- 9DX
- Socket
- B9A
- Base pins
- 9
- Sections
- 2
- Heater voltage
- 10.5 V
- Heater current
- 0.45 A
Replacement tubes for 10EB8
The following tubes are recorded as possible replacements for 10EB8. This direction does not establish that 10EB8 can replace them.
Power - Pentode (NOT beam)
The database records 10GN8 as a possible replacement for10EB8.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - Pentode (NOT beam) |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Radio Detector Converter
The database records 10HF8 as a possible replacement for10EB8.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Radio Detector Converter |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | Not recorded |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Power - Beam (NOT sweep)
The database records 10JA8 as a possible replacement for10EB8.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - Beam (NOT sweep) |
| Construction | Pentode-Triode | BeamPower-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Triode Pentode
The database records 11JE8 as a possible replacement for10EB8.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Triode Pentode |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.9 V |
| Heater current | 0.45 A | 0.45 A |
Where 10EB8 can be used as the replacement
In these recorded relationships, 10EB8 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 10EB8.
Power - Pentode (NOT beam)
The database records 10EB8 as a possible replacement for10GN8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - Pentode (NOT beam) |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Radio Detector Converter
The database records 10EB8 as a possible replacement for10HF8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Radio Detector Converter |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | Not recorded |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Power - Beam (NOT sweep)
The database records 10EB8 as a possible replacement for10JA8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - Beam (NOT sweep) |
| Construction | Pentode-Triode | BeamPower-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Triode Pentode
The database records 10EB8 as a possible replacement for10JY8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Triode Pentode |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Triode Pentode
The database records 10EB8 as a possible replacement for10LZ8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Triode Pentode |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.5 V |
| Heater current | 0.45 A | 0.45 A |
Voltage Triode Pentode
The database records 10EB8 as a possible replacement for11JE8.
No special restrictions are recorded for this substitution.
| Specification | 10EB8 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Voltage Triode Pentode |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9DX | 9DX |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 10.5 V | 10.9 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 10EB8 specifications →