Tube cross-reference
10CW5 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the 10CW5 power - tv vertical output. Compare core specifications and verify every restriction before using a replacement.
Exact variations of 10CW5
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
LL86 Power - TV Vertical Output
- Base
- 9CV
- Socket
- B9A
- Base pins
- 9
- Sections
- 1
- Heater voltage
- 10.6 V
- Heater current
- 0.45 A
Replacement tubes for 10CW5
The following tubes are recorded as possible replacements for 10CW5. This direction does not establish that 10CW5 can replace them.
Power - TV Vertical Output
The database records LL86 as a possible replacement for10CW5.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - TV Vertical Output | Power - TV Vertical Output |
| Construction | Pentode | Pentode |
| Base | 9CV | 9CV |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 10.6 V | 10.6 V |
| Heater current | 0.45 A | 0.45 A |
Where 10CW5 can be used as the replacement
In these recorded relationships, 10CW5 is the replacement tube. The listed original tubes are not automatically suitable as replacements for 10CW5.
Power - TV Vertical Output
The database records 10CW5 as a possible replacement forLL86.
No special restrictions are recorded for this substitution.
| Specification | 10CW5 replacement | Original tube |
|---|---|---|
| Tube type | Power - TV Vertical Output | Power - TV Vertical Output |
| Construction | Pentode | Pentode |
| Base | 9CV | 9CV |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 10.6 V | 10.6 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete 10CW5 specifications →