Electronic tube type
Rectifier - Half Wave vacuum tubes
Rectifier - Half Wave records in Tube Tinker cover 728 tube designations, including 1,886 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.
- Tube records
- 728
- Original datasheets
- 1,886
- Variation families
- 38
- Tubes with alternatives
- 56
About Rectifier - Half Wave tubes
This applies if the tube is described as a half wave rectifier. It must not be a diode tube but a power rectifier. It must have only one rectifier section.
Electrical range
- Nominal heater voltage
- 0.7–117 V
- Nominal heater current
- 0.01–210 A
Common rectifier - half wave characteristics
These are the most frequently recorded attributes among tubes in this category.
Bases
- 4P5
- GOLIATH5
- DOWN4
- 4AU3
- 5AA3
- 7-pin miniature3
- A4-103
- B4A3
Sockets
- UX443
- IO30
- B7G26
- B9A23
- J421
- B4B20
- GOLIATH14
- MEDIUM4BAYONET14
Constructions
- Rectifier726
- Rectifier-Rectifier2
Rectifier - Half Wave tube list
Page 16 of 16
XD64W Rectifier
Directly heated high-vacuum power diode for very-high-voltage rectifier and related pulse service. Rated for approximately 80 kV peak inverse voltage, 3 A DC output, and 15 A peak current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 13 V
- Sections
- 1
XD66R Rectifier
Directly heated high-vacuum power diode for very-high-voltage rectifier, charging, and pulse service. Rated for approximately 80 kV peak inverse voltage, 7 A DC output, and 25 A peak current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 15 V
- Sections
- 1
XD66W Rectifier
Water-cooled directly heated high-vacuum diode for very-high-voltage rectifier and clipper service. Rated for approximately 80 kV peak inverse voltage with substantial documented peak-current capability.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 15 V
- Sections
- 1
XL604L Rectifier
Directly heated National Electronics industrial power rectifier. Rated for approximately 900 V peak inverse voltage, 2.5 A DC output, and 10 A peak current with a low conducting drop.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 2.5 V
- Sections
- 1
XRT1 Rectifier
Machlett directly heated high-vacuum rectifier for extremely high-voltage supplies. Its thoriated-tungsten filament supports approximately 165 kV peak inverse voltage and 1 A peak anode current when oil insulated.
- Base
- Not recorded
- Socket
- EDISON
- Heater
- 6 V
- Sections
- 1
Z225 Rectifier
Directly heated half-wave rectifier for high-voltage supplies. Rated for approximately 10 kV peak inverse voltage, 250 mA DC output, and 1 A peak current with a low conducting drop.
- Base
- Not recorded
- Socket
- MEDIUM4BAYONET
- Heater
- 2.5 V
- Sections
- 1
Z2689 Rectifier
General Electric ceramic-metal planar low-current rectifier diode for compact electronics. Rated for approximately 1 kV peak inverse voltage, 25 mA DC output, and 150 mA peak current.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- Not recorded
- Sections
- 1
Z2731 Rectifier
General Electric ceramic-metal planar power rectifier diode. Rated for approximately 1 kV peak inverse voltage, 125 mA DC output, and 1.1 A peak current from a 6.3 V heater.
- Base
- Not recorded
- Socket
- Not recorded
- Heater
- 6.3 V
- Sections
- 1