Skip to main content

Electronic tube type

Diode (NOT rectifier) vacuum tubes

Diode (NOT rectifier) records in Tube Tinker cover 230 tube designations, including 668 preserved original datasheets. Compare bases, sockets, heater requirements, construction, exact variations, and directional replacement options.

Search this type in the catalog →
Tube records
230
Original datasheets
668
Variation families
9
Tubes with alternatives
36

About Diode (NOT rectifier) tubes

This type qualifies if the tube is described as a signal diode, or other low power diode, NOT a rectifier. Also if multi sections of all diodes, go to this tube type. And there are no other sections that take priority in assigning the type. Signal diodes get lowest priority across tube type assignment. If the diode accompanies another section... if the accompanying section is a triode, evaluate the various Triode type assignments. If it has a pentode or tetrode then evaluate the tube type assignment by those types. If the other section is a beam power then evaluate that as highest priority assignment evaluation.

Electrical range

Nominal heater voltage
1–26.5 V
Nominal heater current
0.06–14 A

Common diode (not rectifier) characteristics

These are the most frequently recorded attributes among tubes in this category.

Bases

  • 6BT4
  • E7-13
  • 7FA2
  • 7O2
  • 8DJ2
  • 9QM2
  • E9-12
  • RIMLOCK2

Sockets

  • B7G38
  • B9A13
  • IO9
  • B53
  • SUBMINIATURE83
  • B42
  • B72
  • B8A2

Constructions

  • Diode121
  • Diode-Diode97
  • Diode-Diode-Diode5
  • Rectifier4
  • Diode-Diode-Diode-Diode2
  • Rectifier-Rectifier1

Diode (NOT rectifier) tube list

Page 5 of 5

Open advanced catalog filters →
  • K51A

    Diode

    Rare-gas-filled microwave noise diode designed as a calibrated noise source for measurements in the 10 cm wavelength band.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    1
  • K81A

    Diode

    Directly heated noise diode designed as a calibrated standard noise source for metric-wave measurements, with recommended operation to approximately 300 MHz.

    Base
    NOVAL
    Socket
    B9A
    Heater
    1.85 V
    Sections
    1
  • KA560DVI

    Diode

    Noble-gas-filled directly heated diode designed as a calibrated microwave noise source in the 10 cm wavelength region.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    1
  • KA561DVI

    Diode

    Noble-gas-filled directly heated diode designed as a calibrated microwave noise source in the 7.5 cm wavelength region.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    1
  • KA562DVI

    Diode

    Noble-gas-filled directly heated diode designed for calibrated microwave noise-source applications, with published ignition, operating-current, voltage-drop, and noise-level data.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    1
  • KA563DVI

    Diode

    Noble-gas-filled directly heated diode designed for calibrated microwave noise-source applications, with published ignition, operating-current, voltage-drop, and noise-level data.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    1
  • KB2

    Diode-Diode

    European battery duodiode intended for detector and rectifier service in portable receiving equipment.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    2 V
    Sections
    2
  • LG1

    Diode

    German special-purpose diode intended for measurement or high-frequency service; available source does not establish a narrower application with sufficient clarity.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    1
  • LG14

    Diode

    German special-purpose diode intended for measurement or high-frequency service; available source does not establish a narrower application with sufficient clarity.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • LG2

    Diode-Diode

    German special-purpose diode pair intended for measurement or high-frequency electronic service; available documentation does not establish a narrower function.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    2
  • LG3

    Diode

    German special-purpose indirectly heated high-voltage diode intended for specialized electronic service.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    1
  • LG4

    Diode-Diode

    German special-purpose indirectly heated duo-diode intended for specialized detector or rectifier service.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    2
  • LG7

    Diode-Diode

    German special-purpose dual diode designed for decimeter-wave equipment and high-frequency detector applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    2
  • M8079

    Diode-Diode

    Rugged special-quality miniature double diode with separate cathodes and internal screening, designed for equipment subject to severe mechanical shock and vibration.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    2
  • M8212

    Diode-Diode

    Special-quality double diode with separate cathodes and internal screening, designed for statistically controlled performance under severe vibration and shock.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    2
  • R128

    Diode-Diode

    Long-life dual diode with separate cathodes designed for dependable detection and rectifying service in professional electronic equipment.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    2
  • R290

    Diode

    Directly heated diode noise-source tube designed for electronic noise measurements, with a normal-support resonance near 1.425 GHz.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    1.85 V
    Sections
    1
  • RA0007B

    Diode

    Special high-vacuum control diode designed for voltage-stabilizing circuits and applications exploiting the dependence of cathode emission on filament voltage.

    Base
    Not recorded
    Socket
    B9A
    Heater
    1.4 V
    Sections
    1
  • RD12GA

    Diode-Diode

    Indirectly heated dual diode designed for decimeter-wave operation, with two diode anodes sharing a common cathode for high-frequency detection.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    12.6 V
    Sections
    2
  • RD24GA

    Diode-Diode

    German dual diode with published high-frequency operating data, intended for specialized RF detector and rectifier applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    2
  • RD24GC

    Diode-Diode

    German dual diode with published high-frequency operating data, intended for specialized RF detector and rectifier applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    2
  • SA100

    Diode

    Telefunken UHF measurement diode designed for quantitative RF and microwave measuring applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    1.9 V
    Sections
    1
  • SA101

    Diode

    Telefunken UHF measurement diode designed for quantitative RF and microwave measuring applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    1.9 V
    Sections
    1
  • SA102

    Diode

    Telefunken UHF measurement diode designed for quantitative RF and microwave measuring applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    1.9 V
    Sections
    1
  • T4D

    Diode

    Indirectly heated television diode intended for low-current signal detection or rectifier applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    4 V
    Sections
    1
  • UAA9

    Diode-Diode

    Low-resistance dual diode, explicitly co-designated with EAA91, designed for FM ratio detectors and related high-frequency detector circuits.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    2
  • UAA91

    Diode-Diode

    Series-heater two-section diode designed for receiving equipment and applicable at intermediate frequencies commonly used in VHF reception.

    Base
    Not recorded
    Socket
    B7G
    Heater
    19 V
    Sections
    2
  • UB41

    Diode-Diode

    Series-heater double diode with separate cathodes designed for detector and rectifier applications in receiving equipment.

    Base
    Not recorded
    Socket
    B8A
    Heater
    19 V
    Sections
    2
  • UD41

    Diode-Diode

    Indirectly heated double-diode rectifier specifically designed for voltage-doubling power supplies, with two physical rectifying sections and approximately 550 V maximum RMS anode voltage per section.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    4 V
    Sections
    2
  • V914

    Diode-Diode

    AC-mains double diode providing two low-current rectifying sections in one envelope, intended for mains-powered receiving equipment and paired signal or detector rectification.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    4 V
    Sections
    2
  • XAA91

    Diode-Diode

    Twin diode with separate cathodes for detector, discriminator, clipping, switching, and general signal rectification, using a 3.15 V heater suited to series-heater equipment.

    Base
    Not recorded
    Socket
    B7G
    Heater
    3.15 V
    Sections
    2
  • XD44A

    Diode

    Gas-discharge diode noise source designed for X-band microwave test and measurement service.

    Base
    Not recorded
    Socket
    DUOPIN2
    Heater
    1 V
    Sections
    1
  • XD9A

    Diode

    Gas-discharge diode noise source designed for X-band microwave test and measurement service.

    Base
    Not recorded
    Socket
    DUOPIN2
    Heater
    Not recorded
    Sections
    1
  • Y1012

    Diode

    Ceramic-and-metal planar diode designed for computer service, using compact construction suited to electronic switching and logic applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    6.3 V
    Sections
    1
  • YA1000

    Diode

    Directly heated Telefunken diode with approximately 5 kV peak reverse-voltage capability, intended for high-voltage rectification or related diode service.

    Base
    Not recorded
    Socket
    B9A
    Heater
    4 V
    Sections
    1
  • ZA1002

    Diode

    Subminiature neon-filled cold-cathode switching and light diode designed for glow-discharge switching, counting, and visual indication.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    1
  • ZA1004

    Diode

    Subminiature gas-filled cold-cathode indicator diode producing a visible glow discharge for electronic indication applications.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    1
  • ZA1006

    Diode

    Long-life subminiature neon-filled cold-cathode switching and light diode designed for glow-discharge switching, counting, and visual indication.

    Base
    Not recorded
    Socket
    Not recorded
    Heater
    Not recorded
    Sections
    1